1, Structure of centrifugal pump impeller
1. Straight blade impeller: A straight blade impeller is the simplest impeller structure, consisting of a series of straight blades that are usually arranged parallel to the axis. Due to the simple design of the blades, the production cost of this impeller structure is relatively low, but its efficiency is low and it is usually used to transport low viscosity liquids.
2. Curved blade impeller: The blades of the curved blade impeller are curved, which can better guide the fluid into the impeller and increase the efficiency of the pump. Curved blade impellers are commonly used for conveying high viscosity liquids or liquids containing particulate matter.
3. Radial blade impeller: A radial blade impeller is an impeller structure composed of a series of flat blades arranged perpendicular to the axis. The efficiency of radial blade impellers is higher than that of straight blade impellers and curved blade impellers, but the requirements for pumps are also higher.
4. Mixed flow blade impeller: A mixed flow blade impeller is an impeller structure between a centrifugal impeller and an axial flow impeller, capable of simultaneously generating axial and radial flow, and is commonly used for conveying high flow liquids.
2, Classification of centrifugal pump impellers
1. Single stage impeller and multi-stage impeller: A single-stage impeller has only one impeller, while a multi-stage impeller consists of multiple impellers. Multi stage impellers are commonly used for conveying high head liquids.
2. Open and closed blades: There is a certain gap between the blades of an open blade impeller, allowing fluid to flow into the impeller through the blade gap. A closed blade impeller has no blade clearance, and its blades are usually closed. Fluid can only enter and exit the impeller through the inlet and outlet of the blades.
3. Straight blade and curved blade: The difference between straight blade and curved blade lies in the shape of the blade. The blades of a straight bladed impeller are straight, while the blades of a curved bladed impeller are curved.
3, Selection of impeller for centrifugal pump
1. Fluid properties: Different fluids have different properties, including viscosity, density, particle size, etc. It is necessary to choose the appropriate impeller structure based on the properties of the fluid.
2. Speed and flow rate: The speed and flow rate of a centrifugal pump also affect the selection of the impeller, which needs to be chosen according to the actual situation.
3. Head and pressure: Head and pressure are important parameters of centrifugal pumps, and suitable impeller structures need to be selected according to actual needs.